PVC Door – DPE-3712 P

The shutter styles made of Plaso Door a uPVC Hollow Tri chambered Section of size 90mm x 37mm x 75mm & 2mm wall thickness with an in built edging on one side & a groove on the other side. The styles will be mitred & joined at the corners by means of Mild Steel Zinc Galvanized brackets of size 75mm x 220mm & self tapping screws. Both the vertical styles of the shutter will be reinforced by inserting primered Mild Steel tube of 1.2mm wall thickness. The shutter lock rail made of Plaso Lock Rail a uPVC hollow Twin chambered section of size 105mm x 37mm x 90mm & 2mm wall thickness will be fixed to the shutter styles by means of aluminum angles & self tapping screws.

The frame will be filled with Pluspan panel a uPVC Multi chambered section of size 100mm x 12mm & 1.2mm wall thickness with the distance between the supporting ribs not exceeding 23mm & joined to one another by male & female, snap fitting system & having a plain surface appearance. The panels will be filled into the frame horizontally with the help of self locking Plaso Snap Beading a uPVC Section of size 15mm x15mm & 1.5mm wall thickness.

PVC Door – DPE-3712 R

The shutter styles made of Plaso Door a uPVC Hollow Tri chambered Section of size 90mm x 37mm x 75mm & 2mm wall thickness with an in built edging on one side & a groove on the other side. The styles will be mitred & joined at the corners by means of Mild Steel Zinc Galvanized brackets of size 75mm x 220mm & self tapping screws. Both the vertical & horizontal styles & the lock rail of the shutter will be reinforced by inserting primered Mild Steel tube of 1.2mm wall thickness. The shutter lock rail made of Plaso Lock Rail a uPVC hollow Twin chambered section of size 105mm x 37mm x 90mm & 2mm wall thickness will be fixed to the shutter styles by means of aluminum angles & self tapping screws.

The frame will be filled with Pluspan 1.5mm panel a uPVC Multi chambered section of size 100mm x 12mm & 1.5mm wall thickness with the distance between the supporting ribs not exceeding 23mm & joined to one another by male & female snap fitting system & having a plain surface appearance. The panels will be filled into the frame horizontally with the help of self locking Plaso Snap Beading a uPVC Section of size 15mm x15mm & 1.5mm wall thickness.

PVC Door – DPE-3712 E

The shutter styles made of Plaso Door a uPVC Hollow Tri chambered Section of size 90mm x 37mm x 75mm & 2mm wall thickness with an in built edging on one side & a groove on the other side. The styles will be mitred & joined at the corners by means of Mild Steel Zinc Galvanized brackets of size 75mm x 220mm & self tapping screws. Both the vertical styles of the shutter will be reinforced by inserting primered Mild Steel tube of 1.2mm wall thickness. The shutter lock rail made of Plaso Lock Rail a uPVC hollow Twin chambered section of size 105mm x 37mm x 90mm & 2mm wall thickness will be fixed to the shutter styles by means of aluminum angles & self tapping screws.

The frame will be filled with Ecopan panel a uPVC Multi chambered section of size 150mm x 12mm & 1.0mm wall thickness with the distance between the supporting ribs not exceeding 23mm & joined to one another by rectangular tail slide fitting system & having a grooved surface appearance. The panels will be filled into the frame horizontally with the help of self locking Plaso Snap Beading a uPVC Section of size 15mm x15mm & 1.5mm wall thickness.

PVC Door – DPE-3720 D

The shutter styles made of Plaso Door a uPVC Hollow Tri chambered Section of size 90mm x 37mm x 75mm & 2mm wall thickness with an in built edging on one side & a groove on the other side. The styles will be mitred & joined at the corners by means of Mild Steel Zinc Galvanized brackets of size 75mm x 220mm & self tapping screws. Both the vertical styles of the shutter will be reinforced by inserting primered Mild Steel tube of 1.2mm wall thickness. The shutter lock rail made of Plaso Lock Rail a uPVC hollow Twin chambered section of size 105mm x 37mm x 90mm & 2mm wall thickness will be fixed to the shutter styles by means of aluminum angles & self tapping screws.

The frame will be filled with Duraking panel a uPVC Multi chambered section of size 305mm x 20mm & 1.0mm wall thickness with the distance between the supporting ribs not exceeding 40mm & joined to one another by rectangular tail, slide fitting system & having a grooved surface appearance. The panels will be filled into the frame vertically with the help of self locking Plaso Screw less Beading a uPVC Section of size 10mm x10mm & 1.0mm wall thickness & self tapping screws. The door shutter will be tie bar with the help of nuts & washers at two places by inserting horizontally 6mm Mild Steel rod.